AGFA Avantra 36/44 Service Manual page 31

1
2
3
4
Figure 1-3 Preparing to remove the plates, diapers and skis.
–Parts list package. –Shipping straps. –Accessory box.
–End support bolts with washers. –Tool kit. –End plate.
9. Cut the two (2) large tie wraps at the center channel, front and back. Refer
to Figure 1-4.
The bottom diaper should fall to the ground.
10. Remove the bottom diaper by sliding it out from either side of the pallet.
Refer to Figure 1-4.
Section I: Imagesetter
7
6
5
–Diaper.
Installation 1-7