Attaching The Panels And Covers - AGFA Avantra 36/44 Service Manual

Avantra 36/44 Service Manual

1.5.5 Attaching the Panels and Covers

1. Using phillips head screws and washers, attach the side covers (one [1] on
each side) to the front of the OLP engine. Refer to Figure 1-19.
2. Attach the lower rear panel. Refer to Figure 1-19.
3. Attach the left side panel (bottom). Refer to Figure 1-19.
1
4. Attach the developer filter on the left side.
1-24 Installation
2
Figure 1-19 Front, rear and side panels.
–Front left side cover. –Front right side cover.
–Lower rear panel. –Left side panel (bottom).
4
3