AGFA Avantra 36/44 Service Manual page 447

6. To end the service program session, press the ON/OFF key.
When code 321 and 322 (repl. pump adjustment) are selected, the display
shows the present percentage (Adjustment Range: 0-200%).
7. Press 15% to increase percentage. Press 85% to decrease percentage.
NOTE:
The service program allows more than one test to run at a
time. The LED displays only the last code entered.
WARNING:
PK7 is always activated with code 232/233.
WARNING:
The service program does not automatically invoke
safety measures. Be sure to take normal safety precautions when
using the program.
WARNING:
Never empty the tanks when working with the service
program.
Section IV: On-line Processor
Maintenance 4-15