Performing the calibration procedures
Accessing the Calibration menu
Press the Key-operator key to enter the Key-operator mode.
1
Press the Down key five times, followed by the Confirm key to select
2
'Calibration'.
The 'Select Calibration' screen appears:
In case the printer is in printing mode, a screen will be presented that the
calibration cannot be done now, but has to be reactivated later.
Press the Escape key to return to the key-operator main menu.
3
Press the Escape key to quit the key-operator mode.
4
2800E EN 20050215
D
4500 R
RYSTAR
EFERENCE MANUAL
Advanced operation (key-operator mode)
105