Opening And Unpacking The Parts Crate - AGFA Avantra 36/44 Service Manual

1
2
–Parts crate (open first). –Engine crate.

1.3.3 Opening and Unpacking the Parts Crate

Steps:
1. Take the pallet with both crates to the site where the OLP is to be installed.
If this is not possible, unpack, remove, and transport the parts according to
the followings steps.
2. Using strap cutters, cut the straps from around the wooden crate.
3. Using a crowbar and claw hammer, open the crate.
4. As the parts are removed, check them against the inventory list at the
beginning of this section and in Figure 1-2.
Parts Container
Engine Container
Figure 1-1 OLP shipping crates.
Section IV: On-line Processor
1
2
Installation 1-5