AGFA Avantra 36/44 Service Manual page 369

Avantra 36/44 Service Manual
7. Using a phillips head screwdriver, remove the two (2) open-door sensors
located on the side of the engine and tape them to the inside of the frame.
Refer to Figure 1-7.
8. Using a phillips head screwdriver, remove the chimney (with fan attached)
and tape them to the inside of the frame. Refer to Figure 1-7.
1
–Sensor (1 of 2) with screws. –Fan attached to chimney.
1-10 Installation
Figure 1-7 Open-door sensors and fan.
2