AGFA Avantra 36/44 Service Manual page 147

Avantra 36/44 Service Manual
NOTE:
This writes a new Correction Table to your Avantra directory.
The PC displays:
Copy COR_HEX to a:? (Y/N)
6. Type "Y". (This copies the new Correction Table to the "A" floppy drive in
the PC).
NOTE:
Please wait until the PC is finished coping the Correction
Table to the floppy disk.
The PC displays:
Correction Table Completed.
Press any key to exit . . .
The new correction table which is now in your Avantra download directory must
be merged with the correct "DSP" software using the "Prog DSP/CORR" in Avdiag
FlashRom menu.
The new Correction Table plus the "DQ" & "L" files should be copied to your origi-
nal system floppy diskette.
When you send in a scale file to be measured for linearity correction you will only
receive the "L" files. You must copy the "DQ" files from the original system diskette
to the diskette with the new "L" files. When completed you should have six files on
the floppy disk before creating the a new Correction Table. The disk should contain
the four "DQ" files from the original system floppy disk plus the two new "L" files.
3-60 Diagnostics