AGFA Avantra 36/44 Service Manual page 115

Avantra 36/44 Service Manual
SGM-A/B Mod Align
This menu item controls the alignment of the SGM parameters. The SGM-A/B Mod
Align Menu appears as follows:
Spinner......................... ON/OFF
(BM) Resolution............ 3600
(BM) BOL Position........ 0
Focus............................ Home/In/Out
Focus Steps...................0
Polarizer........................ 0
Aperture........................ 0
A/B Mod........................ ON/OFF
Beam Comp.................. In/Out
Beam Comp Rate......... 0
* Perform supply motor offset procedure to get this value.
NOTE:
Motor rate values change from above values.
These are the menu items and their functions:
Menu Item
Spinner ON/OFF
Beam On/OFF
Resolution (Beam On)
Gate Start (Beam On)
BOL Position (Beam On)
Gate Length (Beam On
Focus - HOME
Focus - IN
Focus - OUT
Focus - Steps to move
Polarizer
Aperture
Motor Rate
A/B Mod On/Off
S-Current Offset
Beam Comp In/Out
Beam Comp Rate
Beam Comp Offset
* You must follow these commands by a Beam On to activate.
3-28 Diagnostics
Beam............................. ON/OFF
(BM) Gate Start.............. 0
(BM) Gate Length.......... 25
36/44 Focus Mot. Rt........15300
Polar. Motor Rate........... 1600
Spot Motor Rate............. 4500
S-Current Offset............. *
Beam Comp Offset..... 0
Function
Turn the spinner on/off
Turn the beam on/off
*
Set the Resolution
*
Start of where the Beam turns On
*
Set the beginning of scan line position
)*
Set the length of the beam (25 Inches)
Move the focuser to the HOME position
Move the focuser in by the amount set by Steps to move
Move the focuser out by the amount set by Steps to move
Sets the number of steps, in either direction, to move the Focuser
Set the course density by adjusting the polarizer
Set the spot size and the corresponding resolution
Set the Aperture/Polarizer Stepper Motor Rate
Turns A/B Spindle Modulation On/Off
Value to balance A/B Spindle modulation
Moves Beam Compressor Motor In/Out
Speed of Beam Compressor Motor
Offset to Home value of Beam Compressor Motor