AGFA Avantra 36/44 Service Manual page 166

3. Do the same for the middle panel, being careful to clear it from its lock
slots on the sides. Refer to Figure 4-5.
–Front panels (top and middle). –Top panel lock slots.
–Middle panel lock slots. –Bottom panel .
4. To remove the bottom panel, grasp it at the bottom center, lift straight up
and pull forward.
Replace:
1. Reverse the above procedures.
2
3
Figure 4-5 Middle panel lock slots.
Section I: Imagesetter
Removal and Replacement 4-7
1
4