AGFA Avantra 36/44 Service Manual page 79

Avantra 36/44 Service Manual
1
4
2
3
Figure 2-16 Inner nip drive system.
–Inner nip drive system. –Inner nip motor. –Sensor. –Roller.
2.14.4.2 Outer Nip Drive System
The outer nip drive system contains the cutter interlock switch, which, when dis-
abled, shuts off the cutter. Refer to Figure 2-17.
The outer nip releases the pressure between the rollers to allow media to pass
through on an initial media load. The nip release mechanism helps media settle
back onto the drum after normal image feeds and clearing jams.
Two continuous duty, DC, pull type solenoid mechanisms attached to the outside
drive housing perform the take-up nip release function. Refer to Figure 2-17.
2
3
1
Figure 2-17 Outer nip drive system.
–Outer nip drive system. –Two solenoids. –Cutter interlock switch.
2-30 Functional Analysis