AGFA Avantra 36/44 Service Manual page 330

Section III: Buffer
2. Remove the two (2) foam spacers at the top. Refer to Figure 1-2.
3. Lift the cardboard sleeve straight off the pallet.
4. Cut the shipping straps going around the unit frame. Refer to Figure 1-2.
These straps hold the unit's top cover in place.
1
2
3
Figure 1-2 Removing the box, spacers and straps.
–Foam spacers (2). –Box cover.
–Shipping straps (2).
Installation 1-3