Avantra 36/44 Service Manual
3.3.3.1
User Interface
The top bar menu contains the following groups of sub-menus:
•
TEST
•
ALIGN
•
UTILITIES
•
FLASHROM
•
EXIT
Test Menu
Test menu items are:
•
Selectable Tests
•
Download CMD File
•
Functions
Selectable Tests
Displays a dialog box with the following tests:
Test
DEC. Tests
DAC. Ramps
Carriage Tests
Media Tests
OCP Tests
Boot Tests
Bridge Tests
Open Log File
Close Log File
Inside the module menu, choose All Tests or a single test. The test module allows
the user to loop on a test in certain modes. The test modes are:
•
Single Pass–runs test only once, displaying pass/fail error code.
•
Continuous–runs tests the number of cycles entered, ignoring errors.
•
Halt@Error –runs tests the number of cycles entered, stopping if an error
occurs.
3-20 Diagnostics
Function
DEC. - K4 Module Test
Ramps cycles for O-Scope Monitoring
Carriage Movement Tests
Media Motor Tests
OCP Module Tests
Boot Sequence Tests
Bridge/Buffer Tests
Save all Diagnostic output to a Logfile
Close the Logfile