Chrysler 2005 Crossfire SRT6 Service Manual page 1942

9 - 18 ENGINE - ELECTRICAL DIAGNOSTICS
(P0102) MASS AIR FLOW CIRCUIT (CONTINUED)
17.
CHECKING FOR AIR RESTRICTIONS OR LEAKS
Note: Check for any of the following conditions:
• Restricted air intake ducts.
• Misaligned air intake ducts.
• Dirty air cleaner element.
• Deteriorating air cleaner element.
• Any objects blocking the air inlet screen of the MAF Sensor.
• Any debris on the sensing elements.
• A restricted exhaust system.
Were any problems found?
Yes >> Repair as necessary.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
No >> Replace the Mass Air Flow Sensor. (Refer to 14 - FUEL SYSTEM/FUEL INJECTION/MANIFOLD AIR
FLOW (MAF) SENSOR - REMOVAL).
Perform POWERTRAIN VERIFICATION TEST - VER 2.
18.
INTERMITTENT WIRING AND CONNECTORS
The conditions necessary to set this DTC are not present at this time. Using the wiring diagrams as a guide, inspect
the wiring and connectors specific to this circuit. Wiggle the wires while checking for shorts and/or open circuits.
Note: Check for any Technical Service Bulletins that may apply.
Note: Check for any of the following conditions:
• Restricted air intake ducts.
• Misaligned air intake ducts.
• Dirty air cleaner element.
• Deteriorating air cleaner element.
• Any objects blocking the air inlet screen of the MAF Sensor.
• Any debris on the sensing elements.
• A restricted exhaust system.
Were any problems found?
Yes >> Repair as necessary.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
No >> Test Complete.
ZH