Chrysler 2005 Crossfire SRT6 Service Manual page 1918

8W - 97 - 2
ENGINE FUSE BLOCK
DESCRIPTION
All of the electrical current distributed throughout the vehicle is directed through the Engine Fuse Block. The Engine
Fuse Block houses three maxi-type bolt in fuses. The Engine Fuse Block is located in front of the control module
box, next to the windshield wiper solvent fill tube.
OPERATION
All of the current from the battery and the generator output enters the Engine Fuse Block through the cable and
eyelet that are secured with a nut to the Engine Fuse Block B(+) terminal stud located on one end of the Engine
Fuse Block housing. The Engine Fuse Block terminal stud cover is unlatched and opened or removed to access the
Fuses.
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Open the lid (1) of the engine fuse block.
3. Remove the nuts and the electrical leads to the
engine fuse block.
4. Close the lid to the engine fuse block.
5. Push the tab at the front of the engine fuse block
box and remove it from the vehicle.
8W-97 POWER DISTRIBUTION ZH