Chrysler 2005 Crossfire SRT6 Service Manual page 1920

8W - 97 - 4
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Open the lid to the control module box.
3. Move the wires away to the side of the box to access the clip (1) that holds the relay control module in the
control module box.
4. Push the clip (1) back away from the relay control module and lift the relay control module out of the control
module box.
5. Remove all of the relay harness connectors from the relay control module.
8W-97 POWER DISTRIBUTION ZH