Chrysler 2005 Crossfire SRT6 Service Manual page 1919

ZH
INSTALLATION
1. Install the engine fuse onto the studs.
2. Install the plate and the electrical lead to the
engine fuse block.
3. Connect the negative battery cable.
4. Close the lid (1) to the engine fuse block.
5. Close the hood.
RELAY CONTROL MODULE
DESCRIPTION
The Relay Control Module controls many of the vehicle relays. The Relay Control Module is located inside the con-
trol module box. The Relay Control Module can not be serviced and it must be replaced as a unit.
OPERATION
The Relay Control Module is a solid state device containing the following internal relays.
• Air Pump Relay
• Engine Control Relay
• Traction System Relay
• Horn Relay
• Fuel Pump Relay
8W-97 POWER DISTRIBUTION 8W - 97 - 3