Water Hose; Cylinder Head Removal - Honda V65 MAGNA Shop Manual

~
V65MAGNA
Remove the camshaft holders and measure the
width of each plastigauge. The widest thickness
determines the oil clearance.
SERVICE LIMIT:
CENTER: 0.095 mm (0.0037 in)
BOTH ENDS: 0.095 mm (0.0037 in)
When the service limits are exceeded, replace
the camshaft and recheck the oil clearance.
Replace the cylinder head and camshaft holders
if the clearance still exceeds service limits.
CYLINDER HEAD REMOVAL
Loosen the water hose clamp.
Remove the water pipes and hose.
Remove the water pipe a-rings.
Remove the oil pipe and sealing washers.
CYLINDER HEAD/VALVE
WATER HOSE
PIPES OIL PIPE
Remove the front and rear cam chain tensioner
base mounting bolts.
Pull the cam chain tensioner base up.
CAM CHAIN TENSIONER BASE
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.
137 10-