Engine & Frame Torque Values - Honda CBR125R Owner's Manual

GENERAL INFORMATION
STANDARD TORQUE VALUES
FASTENER TYPE
5 mm bolt and nut
6 mm bolt and nut
(Include SH flange bolt)
8 mm bolt and nut
10 mm bolt and nut
12 mm bolt and nut
ENGINE & FRAME TORQUE VALUES
• Torque specifications listed below are for important fasteners.
• Others should be tightened to standard torque values listed above.
BODY PANELS/EXHAUST SYSTEM
ITEM
Grab rail mounting bolt
Muffler joint bolt
Exhaust pipe cover bolt
Exhaust pipe stud bolt
MAINTENANCE
ITEM
Spark plug
Tappet adjusting nut
Crankshaft hole cap
Oil drain bolt
Air cleaner cover screw
Sidestand pivot bolt
Sidestand pivot nut
LUBRICATION SYSTEM
ITEM
Oil pump assembly bolt
FUEL SYSTEM (PGM-FI)
ITEM
Bank angle sensor mounting screw
Bank angle sensor stay nut
O sensor
2
Insulator band screw
Throttle cable stay screw
IACV setting plate torx screw
Sensor unit torx screw
Injector joint mounting bolt
ECT sensor
Fuel pump setting plate nut
1-12
TORQUE
N·m (kgf·m, lbf·ft)
5.2 (0.5, 3.8) 5 mm screw
6 mm screw
10 (1.0, 7) 6 mm flange bolt
22 (2.2, 16) (8 mm head, small flange) and nut
34 (3.5, 25) 8 mm flange bolt and nut
55 (5.6, 41) 10 mm flange bolt and nut
THREAD
Q'TY
DIA. (mm)
4 8
3 6
3 6
2 8
THREAD
Q'TY
DIA. (mm)
1 10
2 5
1 30
1 12
5 5
1 10
1 10
THREAD
Q'TY
DIA. (mm)
2 5
THREAD
Q'TY
DIA. (mm)
2 4
2 4
1 12
2 5
2 5
2 4
3 5
2 5
1 12
6 6
FASTENER TYPE
TORQUE
N·m (kgf·m, lbf·ft)
27 (2.8, 20)
13 (1.3, 10)
13 (1.3, 10)
–
TORQUE
N·m (kgf·m, lbf·ft)
16 (1.6, 12)
10 (1.0, 7)
8.0 (0.8, 5.9)
25 (2.5, 18)
1.2 (0.1, 0.9)
18 (1.8, 13)
44 (4.5, 32)
TORQUE
N·m (kgf·m, lbf·ft)
5.0 (0.5, 3.7)
TORQUE
N·m (kgf·m, lbf·ft)
1.2 (0.1, 0.9)
1.5 (0.2, 1.1)
25 (2.5, 18)
–
3.4 (0.3, 2.5)
2.1 (0.2, 1.5)
3.4 (0.3, 2.5)
5.1 (0.5, 3.8)
24.5 (2.5, 18)
–
TORQUE
N·m (kgf·m, lbf·ft)
4.2 (0.4, 3.1)
9.0 (0.9, 6.6)
12 (1.2, 9)
27 (2.8, 20)
39 (4.0, 29)
REMARKS
See page 2-17
REMARKS
Apply engine oil to
the threads and
seating surface.
Apply engine oil to
the threads and
seating surface.
U-nut
REMARKS
REMARKS
See page 5-57
For tightening
sequence (page 5-
50)