Nuts, Bolts, Fasteners; Wheels/Tires; Front/Rear Wheel - Honda CB HORNET 160R 2015 Shop Manual

MAINTENANCE
Support the motorcycle securely and raise the rear wheel
off the ground.
Check for worn swingarm bearings by grabbing the rear
wheel and attempting to move the wheel and attempting
to move the wheel side to side.
Replace the bearings if any looseness to noted.
Refer to (page 13-13) for swingarm service.

NUTS, BOLTS, FASTENERS

Check that all chassis nuts, bolts and screws are tightened
to their correct torque values (page 1-10).
Check that all cotter pins, clips, hose clamps and cable
stays are in place and properly secured.

WHEELS/TIRES

FRONT WHEEL
Support the motorcycle on its center stand, and raise the
front wheel off the ground.
Check for worn wheel bearings by holding the fork leg, and
attempting to move the wheel side to side.
Replace the bearings if any looseness is noted.
Refer to the front wheel bearings replacement
(page 12-10).
REAR WHEEL
Support the motorcycle on its center stand.
Check for worn wheel and driven flange bearings by
holding the swingarm, and attempting to move the wheel
side to side.
Replace the bearings if any looseness is noted.
Refer to each bearing replacement:
– Rear wheel bearings (page 13-6)
– Driven flange bearing (page 13-10)
3-24