NEC Univerge SV8100 Features And Specifications Manual page 101

UNIVERGE SV8100
Program
Program Name
Number
41-10-04 ACI Delay Announcement – 2nd
Delay Announcement Connection
Timer
41-10-05 ACI Delay Announcement – 2nd
Delay Announcement Sending
Duration
41-11-01 VRS Delay Announcement –
Delay Message Start Timer
41-11-02 VRS Delay Announcement – 1st
Delay Message Number
41-11-03 VRS Delay Announcement – 1st
Delay Message Sending Count
41-11-04 VRS Delay Announcement – 2nd
Delay Message Number
41-11-05 VRS Delay Announcement – 2nd
Waiting Message Sending Count
41-11-06 VRS Delay Announcement – Tone
Kind at Message Interval
41-11-07 VRS Delay Announcement – ACD
Forced Disconnect Time after the
2nd Delay Message
41-11-08 VRS Delay Announcement –
Queue Depth Announcement
(Requires VRS)
41-12-01 Night Announcement Setup –
Night Announcement Source
Type
41-12-02 Night Announcement Setup –
Night Announcement ACI Port
Number
SV8100 Features and Specifications Manual
Description/Comments
Set the time between when the 1st
Delay Announcement plays and
when the 2nd Delay Announcement
plays.
Set the timer for how long the 2nd
Delay Announcement plays. After
this time expires, the call
disconnects. To keep the call in
queue, set this time to 0.
Input the time before the 1st Delay
Message Starts.
Assign the VRS message number to
be used as the message source for
the 1st and 2nd Delay
Announcement Messages. Refer to
Program 41-08 for more on setting
up the ACD overflow options. This
program is activated when the delay
announcement source and options
are assigned as VRS in Program 41-
08-03.
Input the number of times the 1st
Delay Message is sent. If set to 0,
the message is not played.
Input the VRS Message to be played
as the 2nd Delay Message.
Input the number of times the 2nd
Delay Message is sent. If set to 0,
the message is not played
Input what is heard between the
Delay messages.
Set the time, after the last 2nd Delay
Message is played, before the call is
disconnected.
Input when the Queue Depth
Announcement will be played.
Define the source for each ACD
groups night announcement. Night
announcement availability depends
on the setting in Program 41-03-02.
Define the ACI port to be used for
the ACD Night Announcement
function.
Assigned Data
0~64800 (seconds)
(default = 60 seconds)
0~64800 (seconds)
(default = 0 seconds)
0~64800 (seconds)
(default = 0 seconds)
0~101
0 = No Message
101 = Fixed Message
(default = 0)
0~255
(default = 0)
0~101
0 = No Message
101 = Fixed Message
(default = 0)
0~255
(default = 0)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
(default = 0)
0~64800 (seconds)
0 = No Disconnect
(default = 60 seconds)
0 = Disable
1 = After 1st (1st)
2 = After 2nd (2nd)
3 = After 1st and 2nd
(1st and 2nd)
(default = 0)
0 = ACI
1 = VRS
(default = 0)
0~96
0 = No Setting
(default = 0)
Issue 1.0
Level
1 2 3
2 - 77