Clearance F Nspection - Acura 1994 Integra Service Manual

Mainshaft Assembly
Clearance Inspection
NOTE: lf replacement is required. always replace the
synchro sleeve and the synchro hub as a set.
1.
Measure the clearance between 2nd and 3rd gears.
Standard:
0.06 - 0.21 mm {0.002 - 0.008 inl
Ssrvica Limit: 0.3 mm (0.01 in)
13-22
Engine Type 8 1 8 C 1 8 1 8 8 1
Standard
34.92 - 34.97 mm
( 1 . 3 7 5 - 1 . 3 7 7 i n )
34.42 - 34.47 mm
( 1 . 3 5 5 - 1 . 3 5 7 i n )
Service Limit
34.8 mm
( 1 . 3 7 0 i n )
34.3 mm
( 1 . 3 5 0 i n )
2.
lf the clearance is more than the service limit, mea-
sure the thickness of 3rd gear.
lf the thickness of 3rd gear is less than the ser-
vice limit, replace 3rd gear with a new one.
lf the thickness of 3rd gear is within the service
limit, replace the 3rd/4th synchro hub with a new
one.
3RD GEAR