Novell NETWARE 6-DOCUMENTATION Manual page 2480

Additional Information
DISPLAY INTERRUPTS
Purpose
Syntax
42
Utilities Reference
New Packet Receive Buffer Wait Time: 0.1 seconds
IPX CMD Mode Routing: OFF
Load Balance Local LAN: OFF
Garbage Collection Interval: 5 minutes
Alloc Memory Check Flag: OFF
Reserved Buffers Below 16 Meg: 300
Read Ahead Enabled: ON
Read Ahead LRU Sitting Time Threshold: 10 seconds
Minimum File Cache Buffers: 20
Maximum Concurrent Disk Cache Writes: 4000
Dirty Disk Cache Delay Time: 0.1 seconds
Topic
List server parameters
settings that have been
modified from default values
Restore server parameter
settings to their default
values
Descriptions of settable
server parameters
Print server parameter
settings to a file
Use to display currently assigned hardware interrupts, interrupt handlers (also
called Interrupt Service Routines or ISRs), and interrupt statistics.
DISPLAY INTERRUPTS [option]
See
"DISPLAY MODIFIED ENVIRONMENT" on
page 44
"RESET ENVIRONMENT" on page 162
"SET" on page 186
Printing Current Parameter Values to a File