Novell NETWARE 6-DOCUMENTATION Manual page 2472

Examples
Additional Information
34
Utilities Reference
file. To record as many console messages as possible, place the LOAD
CONLOG command near the beginning (immediately after the FILE
SERVER NAME, as above). Use EDIT or NWCONFIG to modify the
AUTOEXEC.NCF file.
To start capturing console messages during system initialization, enter
[LOAD] CONLOG
To load CONLOG but save the current log file as clog.bak and limit the
size of console.log to 100 KB, enter
[LOAD] CONLOG SAVE=CLOG.BAK MAXIMUM=100
To load CONLOG, limit the size of console.log to 200 KB, and schedule
existing console log files for daily archiving at 6:00 a.m., enter
[LOAD] CONLOG MAXIMUM=200 ARCHIVE=YES NEXT=06:00:00
To stop capturing console messages, enter
UNLOAD CONLOG
Topic
View console log file
Edit autoexec.ncf file
See
"VIEW" on page 278
"INETCFG" on page 69
Using Server Batch Files