Display Transceiver-Information Interface - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands
Description
Use the display port command to display whether there are hybrid ports or trunk ports
in the current system. If there is such port, the port name and the ID of the VLAN
permitted on the port are displayed.
Example
# Display the trunk ports in the current system.
<3Com> display port trunk
Interface
Ethernet3/0/3
Ethernet3/0/11

1.1.8 display transceiver-information interface

Syntax
display transceiver-information interface interface-type interface-number
View
Any view
Parameter
interface-type: Port type
interface-number: Port number
Description
Use the display port display transceiver-information interface command to display
information about a specified optical port.
Example
# Display the information about the optical interface GigabitEthernet1/0/1.
<3Com> display transceiver-information interface GigabitEthernet 1/0/1
Hardware Type
Interface Type
Wave Length(nm)
Vendor Name
Serial Number
Transfer Distance(m)
VLAN passing
1
1-2, 4-5, 10
: SM
: SFP
: 1310
: OCP
: 2786837
9um Fiber : 69000
50um Fiber : 0
62.5um Fiber : 0
Copper Line : 0
Chapter 1 Port Basic Configuration Commands
1-10