Table of Contents
Advertisement
System administration
Configuration files
The IX20 configuration file, /etc/config/accns.json, contains all configuration changes that have been
made to the device. It does not contain the complete device configuration; it only contains changes to
the default configuration. Both the default configuration and the changes contained in the accns.json
file are applied when the device reboots.
Save configuration changes
When you make changes to the IX20 configuration, the changes are not automatically saved. You must
explicitly save configuration changes, which also applies the changes. If you do not save configuration
changes, the system discards the changes.
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Make any necessary configuration changes.
4. Click Apply to save the configuration and apply the change.
Command line
1. Log into the IX20 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX20 User Guide
Configuration files
708
Advertisement
Table of Contents
