Table of Contents
Advertisement
System administration
Configuration files
The TX54 configuration file, /etc/config/accns.json, contains all configuration changes that have been
made to the device. It does not contain the complete device configuration; it only contains changes to
the default configuration. Both the default configuration and the changes contained in the accns.json
file are applied when the device reboots.
Save configuration changes
When you make changes to the TX54 configuration, the changes are not automatically saved. You
must explicitly save configuration changes, which also applies the changes. If you do not save
configuration changes, the system discards the changes.
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Make any necessary configuration changes.
4. Click Apply to save the configuration and apply the change.
Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
TX54 User Guide
Configuration files
890
Advertisement
Table of Contents
