Configuration Files; Save Configuration Changes - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

System administration

Configuration files

The IX14 configuration file, /etc/config/accns.json, contains all configuration changes that have been

made to the device. It does not contain the complete device configuration; it only contains changes to

the default configuration. Both the default configuration and the changes contained in the accns.json

file are applied when the device reboots.

When you make changes to the IX14 configuration, the changes are not automatically saved. You must

explicitly save configuration changes, which also applies the changes. If you do not save configuration

changes, the system discards the changes.

1. Log into the IX14 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Make any necessary configuration changes.

4. Click Apply to save the configuration and apply the change.

Command line

IX14 User Guide

Configuration files