Step 2: Set Up Access To Digi Remote Manager; Step 3: Add Your Router To Digi Remote Manager; Step 4: Complete Setup; Step 5: Configure Cellular Apn - Digi IX40 User Manual

Digi IX40 Quick start
router, switch, or Wi-Fi access point.
4. Connect the Digi IX40 to DCpower.
Note If the PWR LED is not lit, then check the power source.

Step 2: Set up access to Digi Remote Manager

If you already have Digi Remote Manager, skip this step and go to
Remote Manager.
1. In a web browser, type https://remotemanager.digi.com.
2. Type your login credentials in the Username field.
3. Click Continue
4. Type your login credentials in the Password field.
5. Click Login.
The Digi Remote Manager Dashboard displays.

Step 3: Add your router to Digi Remote Manager

Add your router as instructed in

Step 4: Complete setup

1. The device should connect within a couple of minutes.
2. If newer firmware is available, Remote Manager will prompt you to update the device. Click
Update to update the firmware. Remote Manager will perform the update in the background
and let you know when the device is up to date.
3. Click Done when the firmware update is complete.

Step 5: Configure cellular APN

If you inserted a SIM card in the Digi IX40, once the it is powered up, it will attempt to set up the APN
automatically. However, if your SIM was set up with a custom APN, it must be manually configured.
To manually configure the APN:
1. In Remote Manager, click Management, and then Devices.
2. In the list of devices, click the name of your Digi IX40.
IX40 User Guide
Step 2: Set up access to Digi Remote Manager
Remote Manager Getting started
Step 3. Add your router to Digi
wizard.
20