Table of Contents
Advertisement
Digi IX20 Quick Start
1. Go to
shop.digi.com
You will receive an email from Remote Manager after your registration is complete.
2. Click the link in the email to go to Remote Manager and click Forgot Password to set up your
login and password.
3.
Log into
Remote Manager.
Step 4: Register your device
Register the device as instructed by
Step 5: Complete setup
1. The device should connect within a couple of minutes.
2. If newer firmware is available, Remote Manager will prompt you to update the device. Click
Update to update the firmware. Remote Manager will perform the update in the background
and let you know when the device is up to date.
3. Click Done when the firmware update is complete.
Step 6: Configure cellular APN
If you installed a SIM in
your SIM was setup with a custom APN, you will need to configure it manually:
1. Navigate to the Settings tab in the Remote Manager Device Details view.
2. Expand the Config menu item and click on the Network settings menu.
3. Expand Interfaces > Modem > modem > APN list > APN list 1.
4. For APN, enter the custom APN provided by your cellular provider.
5. Click Apply.
6. Navigate back to the Details tab and watch for confirmation of cellular connectivity.
IX20 User Guide
to create a new Remote Manager account.
the getting started
step
3, the device will attempt to setup the APN automatically. However, if
Step 4: Register your device
wizard.
28
Advertisement
Table of Contents
