Table of Contents
Advertisement
Interfaces
12. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Change the default LAN subnet
You can change the IX10 default LAN subnet—192.168.2.1/24—to any range of private IPs. The local
DHCP server range will also change to the range of the LAN subnet.
To change the LAN subnet:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces > LAN > IPv4.
4. For Address, change the IP address to an alternate private IP. You must also specify the subnet
IX10 User Guide
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
133
Advertisement
Table of Contents
