Table of Contents
Advertisement
Hotspot
3. Change the SSID for digi_hotspot_ap to your preferred value:
(config)> network wifi ap digi_hotspot_ap ssid value
where value is a string of 1 to 32 characters. If the value contains spaces, enclose in quote
marks (").
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Change the default hotspot IP address and subnet
Required configuration items
Enable default hotspot configuration. See
n
instructions.
An IP address and subnet for the hotspot.
n
Additional configuration items
Hotspot DHCP server settings:
n
Lease time.
l
Lease range start and end.
l
To change the default hotspot IP address and subnet:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Hotspots > hotspot.
4. Click to expand IPv4.
Digi Connect EZ 4/4i User Guide
Enable hotspot using the default configuration
Hotspot configuration
for
270
Advertisement
Table of Contents
