Table of Contents
Advertisement
Digi IX20 Quick Start
Migrating from a WR-series device?
router.
Step 1: Connect your device
1. Insert your activated SIM (2FF) card(s) provided by your cellular carrier into the CORE modem,
and insert the CORE modem device:
a. Identify the SIM 1 and SIM 2 slots on the CORE modem. If using only one SIM card, insert it
into SIM 1. A second SIM may be inserted into slot SIM 2 for an alternate wireless carrier.
b. For high-vibration environments, apply a thin layer of dielectric grease to the SIM contacts.
Note
If the IX20 device is used in an environment with high vibration levels, SIM card
contact fretting may cause unexpected SIM card failures. To protect the SIM cards, Digi
strongly recommends that you apply a thin layer of dielectric grease to the SIM contacts
prior to installing the SIM cards. See
instructions.
c. Insert the SIM cards into the CORE modem.
d. On the IX20 back panel, remove the CORE modem cover by loosening the cover plate
thumb screw and removing the cover plate.
e. With the antennas SMA connectors pointing outward, slide the CORE modem into the IX20
device. A clicking sound will indicate it is properly inserted.
IX20 User Guide
Click here
for information and tools to set up your new IX-series
Apply Dielectric Grease over SIM Contacts
for
21
Advertisement
Table of Contents
