Connect Xlr Pro Hardware - Digi XLR PRO Getting Started Manual

Connect XLR PRO hardware

The following illustration shows how to connect XLR PRO cables and the XLR PRO power supply.
For a serial connection:
• Connect the XLR PRO serial port (RJ45) using a network cable, the RJ45/DB9 adapter, and the USB
to RS-232 converter cables.
For Ethernet or Ethernet bridging:
• Connect an XLR PRO Ethernet port using a network cable.
WARNING! Use the serial port for serial connections only. Do not connect the serial RJ45 port to any
For both XLR PROs:
• Attach an antenna to the XLR PRO before powering on the device.
XLR PRO Getting Started Guide
Ethernet or
bridging
PoE (power over Ethernet) device. Doing so could permanently damage the XLR PRO or
PoE device and void your XLR PRO warranty.
Connect XLR PRO hardware
Serial
7