Show Ipv6 Ospf Database Output Details - Enterasys G3G170-24 Cli Reference Manual

G-series
Hide thumbs Also See for G3G170-24:
Table of Contents

Advertisement

show ipv6 ospf database
This example illustrates the output of this command using the adv‐router parameter.
G3(su)->router>show ipv6 ospf database external adv-router
LS Age: 930
LS Type: AS-External-LSA
LS Id: 1
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000006
Checksum: 0x3e4c
Length: 36
Options:(E-Bit)
Metric Type: 2
Metric:20
IPv6 Prefix: 2301::/64 (None)
Table
19‐5 provides an explanation of the command output.
Table 19-5 show ipv6 ospf database Output Details
Output Field
Link Id
Advertising Router
LS Age
LS Type
LS Seq Number
Checksum
Lenght
Options
Metric Type
Metric
IPv6 Prefix
19-34 OSPFv3 Configuration
AS External States
What It Displays...
Number that uniquely identifies an LSA that a router originates
from all other self originated LSAs of the same LS type.
The Advertising Router. Is a 32 bit dotted decimal number
representing the LSDB interface.
Number representing the age of the link state advertisement in
seconds.
The format and function of the specified LSA.
Number that represents which LSA is more recent.
Total number LSA checksum.
Size of the LSA in bytes.
Option bits in LSA header. Refer to section A.2 in RFC 2740 for
more information. Possible values are:
V6 — indicates status of V6 bit. If this bit is clear, the router/link
should be excluded from IPv6 routing calculations.
E — indicates status of E-bit. This bit describes the way AS-
external-LSAs are flooded.
M — indicates the status of MC-bit. This bit describes whether IP
multicast datagrams are forwarded.
N — indicates the status of N-bit. This bit describes the handling
of Type-7 LSAs.
R — indicates the status of R-bit. This bit (the `Router' bit)
indicates whether the originator is an active router.
D — indicates the status of DC-bit. This bit describes the router's
handling of demand circuits.
Whether the route specified is external type 1 or external type 2.
The cost of using the specified router link.
The IPv6 route with prefix mask being displayed.

Advertisement

Table of Contents
loading

Table of Contents