Clear Ipv6 Gateway; Show Ipv6 Neighbors - Enterasys G3G170-24 Cli Reference Manual

clear ipv6 gateway

Use the show ipv6 address command to display a configured IPv6 gateway address.
Example
This example shows how to configure an IPv6 gateway address using a link‐local address.
G3(su)->set ipv6 gateway fe80::201:f4ff:fe5d:1234
G3(su)->show ipv6 address
Name
------------
host
gateway
clear ipv6 gateway
Use this command to clear an IPv6 gateway address.
Syntax
clear ipv6 gateway
Parameters
None.
Defaults
None.
Mode
Switch mode, read‐write.
Example
This example shows how to remove a configured IPv6 gateway address.
G3(su)->show ipv6 address
Name
------------
host
gateway
G3(su)->clear ipv6 gateway
G3(su)->show ipv6 address
Name
------------
host

show ipv6 neighbors

Use this command to display the system IPv6 Neighbor Discovery Protocol cache.
Syntax
show ipv6 neighbors
17-6 IPv6 Management
IPv6 Address
----------------------------------------
FE80::201:F4FF:FE5C:2880/64
FE80::201:F4FF:FE5D:1234
IPv6 Address
----------------------------------------
FE80::201:F4FF:FE5C:2880/64
FE80::201:F4FF:FE5D:1234
IPv6 Address
----------------------------------------
FE80::201:F4FF:FE5C:2880/64