Clear Snmp Community - Enterasys G3G170-24 Cli Reference Manual

clear snmp community

context context
transport transport
volatile |
nonvolatile
Defaults
If securityname is not specified, the community name will be used.
If context is not specified, access will be granted for the default context.
If transport tag is not specified, none will be applied.
If storage type is not specified, nonvolatile will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to set an SNMP community name called "vip"
G3(su)->set snmp community vip
clear snmp community
Use this command to delete an SNMP community name.
Syntax
clear snmp community name
Parameters
name
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete the community name "vip."
G3(su)->clear snmp community vip
5-14 SNMP Configuration
(Optional) Specifies a subset of management information this community
will be allowed to access. Valid values are full or partial context names. To
review all contexts configured for the device, use the show snmp context
command as described in "show snmp context" on page 5‐20.
(Optional) Specifies the set of transport endpoints from which SNMP
request with this community name will be accepted. Makes a link to a
target address table.
(Optional) Specifies the storage type for these entries.
Specifies the SNMP community name to clear.