Configuring Radius; Purpose; Commands - Enterasys G3G170-24 Cli Reference Manual
G-series
Hide thumbs
Also See for G3G170-24:
- Hardware installation manual (59 pages) ,
- Hardware installation manual (70 pages) ,
- Quick reference (2 pages)
Table of Contents
Advertisement
Filter-ID Attribute Formats
Enterasys Networks supports two Filter‐ID formats — "decorated" and "undecorated." The
decorated format has three forms:
•
To specify the policy profile to assign to the authenticating user (network access
authentication):
Enterasys:version=1:policy=string
where string specifies the policy profile name. Policy profile names are case‐sensitive.
•
To specify a management level (management access authentication):
Enterasys:version=1:mgmt=level
where level indicates the management level, either ro, rw, or su.
•
To specify both management level and policy profile:
Enterasys:version=1:mgmt=level:policy=string
The undecorated format is simply a string that specifies a policy profile name. The undecorated
format cannot be used for management access authentication.
Decorated Filter‐IDs are processed first by the switch. If no decorated Filter‐IDs are found, then
undecorated Filter‐IDs are processed. If multiple Filter‐IDs are found that contain conflicting
values, a Syslog message is generated.
Configuring RADIUS
Purpose
To perform the following:
•
Review the RADIUS client/server configuration on the switch.
•
Enable or disable the RADIUS client.
•
Set local and remote login options.
•
Set primary and secondary server parameters, including IP address, timeout period,
authentication realm, and number of user login attempts allowed.
•
Reset RADIUS server settings to default values.
•
Configure a RADIUS accounting server.
Commands
For information about...
show radius
set radius
clear radius
show radius accounting
set radius accounting
clear radius accounting
Configuring RADIUS
Refer to page...
20-4
20-5
20-6
20-7
20-8
20-9
Enterasys G-Series CLI Reference 20-3
Advertisement
Table of Contents
