show banner motd
Mode
Switch command, read‐write.
Example
This example shows how to set the command prompt to Switch 1:
G3(su)->set prompt "Switch 1"
Switch 1(su)->
show banner motd
Use this command to show the banner message of the day that will display at session login.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the banner message of the day:
G3(rw)->show banner motd
O Knights of Ni, you are just and
fair, and we will return with a shrubbery
set banner motd
Use this command to set the banner message of the day displayed at session login.
Syntax
set banner motd message
Parameters
message
2-20 Basic Configuration
-King Arthur
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.
Specifies a message of the day. This is a text string that needs to be in
double quotes if any spaces are used. Use a \n for a new line and \t for a
tab (eight spaces).