Chapter 20: Security Configuration; Overview Of Security Methods - Enterasys G3G170-24 Cli Reference Manual

This chapter describes the Security Configuration set of commands and how to use them.
For information about...

Overview of Security Methods

Configuring RADIUS
Configuring 802.1X Authentication
Configuring MAC Authentication
Configuring Multiple Authentication Methods
Configuring VLAN Authorization (RFC 3580)
Configuring MAC Locking
Configuring Port Web Authentication (PWA)
Configuring Secure Shell (SSH)
Configuring Access Lists
Overview of Security Methods
The following security methods are available for controlling which users are allowed to access,
monitor, and manage the switch.
• Login user accounts and passwords – used to log in to the CLI via a Telnet connection or local
COM port connection. For details, refer to "Setting User Accounts and Passwords" on
page 2‐2.
• Host Access Control Authentication (HACA) – authenticates user access of Telnet
management, console local management and WebView via a central RADIUS Client/Server
application. When RADIUS is enabled, this essentially overrides login user accounts. When
HACA is active per a valid RADIUS configuration, the user names and passwords used to
access the switch via Telnet, SSH, WebView, and COM ports will be validated against the
configured RADIUS server. Only in the case of a RADIUS timeout will those credentials be
compared against credentials locally configured on the switch.
"Configuring RADIUS" on page 20‐3.
• SNMP user or community names – allows access to the G‐Series switch via a network SNMP
management application. To access the switch, you must enter an SNMP user or community
name string. The level of management access is dependent on the associated access policy. For
details, refer to Chapter
• 802.1X Port Based Network Access Control using EAPOL (Extensible Authentication
Protocol) – provides a mechanism via a RADIUS server for administrators to securely
Security Configuration
5.
20
Refer to page...
20-1
20-3
20-10
20-19
20-30
20-41
20-46
20-57
20-68
20-70
For details, refer to
Enterasys G-Series CLI Reference 20-1