Enterasys G3G170-24 Cli Reference Manual page 175

Mode
Switch command, read‐only.
Usage
State definitions, such as ActorAdminState and Partner AdminState, are indicated with letter
abbreviations. If the show port lacp command displays one or more of the following letters, it
means the state is true for the associated actor or partner ports:
• E = Expired
• F = Defaulted
• D = Distributing (tx enabled)
• C = Collecting (rx enabled)
• S = Synchronized (actor and partner agree)
• G = Aggregation allowed
• S/l = Short/Long LACP timeout
• A/p = Active/Passive LACP
For more information about these states, refer to set port lacp (page
specification.
Examples
This example shows how to display detailed LACP status information
G3(su)-> show port lacp port ge.1.12 status detail
Port Instance:
ActorPort:
ActorSystemPriority:
ActorPortPriority:
ActorAdminKey:
ActorOperKey:
ActorAdminState:
ActorOperState:
ActorSystemID:
SelectedAggID:
AttachedAggID:
MuxState:
DebugRxState:
This example shows how to display summarized LACP status information for port
G3(su)->show port lacp port ge.1.12 status summary
Port Aggr
ge.1.12 none
This example shows how to display LACP counters for port
G3(su)->show port lacp port ge.1.12 counters
Port Instance:
LACPDUsRx:
LACPDUsTx:
IllegalRx:
UnknownRx:
MarkerPDUsRx:
ge.1.12
1411
32768
32768
32768
32768
-----GlA
-F----lA
00-e0-63-9d-b5-87
none
none
Detached
port Disabled
Actor System
Pri: System ID:
[
(32768,00e0639db587,32768),(32768,000000000000, 1411)
PartnerAdminPort:
PartnerOperPort:
PartnerAdminSystemPriority:
PartnerOperSystemPriority:
PartnerAdminPortPriority:
PartnerOperPortPriority:
PartnerAdminKey:
PartnerOperKey:
PartnerAdminState:
PartnerOperState:
PartnerAdminSystemID:
PartnerOperSystemID:
Partner System
Key: Pri: System ID:
ge .1.12:
ge.1.12
11067
0
0
0
0
Enterasys G-Series CLI Reference 4-43
show port lacp
4‐44) and the IEEE 802.3 2002
f
or port ge .1.12:
1411
1411
32768
32768
32768
32768
1411
1411
--DCSGlp
--DC-Glp
00-00-00-00-00-00
00-00-00-00-00-00
ge .1.12:
Key:
]