Clear Summertime; Set Prompt - Enterasys G3G170-24 Cli Reference Manual

Mode
Switch command, read‐write.
Example
This example shows how set daylight savings time to recur starting on the first Sunday of April at
2 a.m. and ending the last Sunday of October at 2 a.m. with an offset time of one hour:
G3(su)->set summertime recurring first Sunday April 02:00 last Sunday October
02:00 60

clear summertime

Use this command to clear the daylight savings time configuration.
Syntax
clear summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the daylight savings time configuration:
G3(su)->clear summertime

set prompt

Use this command to modify the command prompt.
Syntax
set prompt prompt_string
Parameters
prompt_string
Defaults
None.
Specifies a text string for the command prompt.
Note: A prompt string containing a space in the text must be enclosed
in quotes as shown in the example below.
clear summertime
Enterasys G-Series CLI Reference 2-19