show ipv6 address
show ipv6 address
Use this command to display the system IPv6 address(es) and IPv6 gateway address (default
router), if configured.
Syntax
show ipv6 address
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Usage
This command displays the IPv6 addresses configured automatically and with the set ipv6
address and set ipv6 gateway commands.
Example
This example displays three IPv6 management addresses configured for the switch.
G3(su)->show ipv6 address
Name
------------
host
host
gateway
clear ipv6 address
Use this command to clear IPv6 global addresses.
Syntax
clear ipv6 [address {all|ipv6-addr/prefix-length}]
Parameters
ipv6‐addr
prefix‐length
all
Defaults
If address is not entered, all manually configured global IPv6 addresses are cleared.
17-4 IPv6 Management
IPv6 Address
----------------------------------------
FE80::201:F4FF:FE5C:2880/64
2001:DB8:1234:5555:201:F4FF:FE5C:2880/64
FE80::201:F4FF:FE5D:1234
The IPv6 address to be cleared. This parameter must be in the form
documented in RFC 4291, with the address specified in hexadecimal using
16‐bit values between colons.
The length of the IPv6 prefix for this address. The value of prefix‐length is a
decimal number indicating the number of high‐order contiguous bits of the
address that comprise the network portion of the address.
Deletes all IPv6 global addresses.