Command; Show Vlan - Enterasys G3G170-24 Cli Reference Manual

Command

For information about...

show vlan

show vlan
Use this command to display all information related to one or more VLANs.
Syntax
show vlan [static] [vlan-list] [portinfo [vlan vlan-list | vlan-name] [port port-
string]]
Parameters
static
vlan‐list
portinfo
vlan vlan‐list |
vlan‐name
port port‐string
Defaults
If no options are specified, all information related to static and dynamic VLANs will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display information for VLAN 1. In this case, VLAN 1 is named
"DEFAULT VLAN". Ports allowed to transmit frames belonging to VLAN 1 are listed as egress
ports. Ports that won't include a VLAN tag in their transmitted frames are listed as untagged
ports. There are no forbidden ports (prevented from transmitted frames) on VLAN 1:
G3(su)->show vlan 1
VLAN: 1
VLAN Type: Default
Egress Ports
ge.1.1-10, ge.2.1-4, ge.3.1-7,
Forbidden Egress Ports
None.
Untagged Ports
ge.1.1-10, ge.2.1-4, ge.3.1-7,
Table 7‐2 provides an explanation of the command output.
(Optional) Displays information related to static VLANs. Static VLANs are
manually created using the set vlan command ("set vlan" on page 7‐4),
SNMP MIBs, or the WebView management application. The default VLAN,
VLAN 1, is always statically configured and can't be deleted. Only ports
that use a specified VLAN as their default VLAN (PVID) will be displayed.
(Optional) Displays information for a specific VLAN or range of VLANs.
(Optional) Displays VLAN attributes related to one or more ports.
(Optional) Displays port information for one or more VLANs.
(Optional) Displays port information for one or more ports.
NAME: DEFAULT VLAN
Refer to page...
7-3
Enterasys G-Series CLI Reference 7-3
show vlan