Show Lldp Port Location-Info; Show Lldp Port Local-Info - Enterasys G3G170-24 Cli Reference Manual

Example
This example shows how to display transmit TLV information for three ports.
G3(ro)->show lldp port tx-tlv ge.1.1-3
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Column Pro Id uses letter notation for enable: s-stp, l-lacp, g-gvrp
Ports
-------
ge.1.1
ge.1.2
ge.1.3

show lldp port location-info

Use this command to display configured location information for one or more ports. Ports are
configured with a location value using the set lldp port location‐info command.
Syntax
show lldp port location-info [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, port location configuration information will be displayed for all
ports.
Mode
Switch command, read‐only.
Example
This example shows how to display port location information for three ports.
G3(ro)->show lldp port location-info ge.1.1-3
Ports
--------
ge.1.1
ge.1.2
ge.1.3

show lldp port local-info

Use this command to display the local system information stored for one or more ports. You can
use this information to detect misconfigurations or incompatibilities between the local port and
the attached endpoint device (remote port).
Port Sys Sys Sys Mgmt Vlan Pro
Desc Name Desc Cap Addr Id
---- ---- ---- --- ---- ---- ---- --- --- ---- ----
* * * * *
* * * * *
* * * * *
(Optional) Displays port location information for one or a range of
ports.
Type Location
------------- -------------------------
ELIN 1234567890
ELIN 1234567890
ELIN 1234567890
MAC PoE Link Max
Id PHY Aggr Frame Cap Pol Loc PoE
* slg * *
* slg * *
* slg * *
show lldp port location-info
MED MED MED MED
--- --- --- ---
* * *
*
* * *
Enterasys G-Series CLI Reference 3-17