Show Port Counters; Show Port Status Output Details - Enterasys G3G170-24 Cli Reference Manual

Defaults
If port‐string is not specified, status information for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display status information for
G3(su)->show port status ge.3.14
Port
------------
ge.3.14
Table 4‐1 provides an explanation of the command output.
Table 4-1 show port status Output Details
Output Field
Port
Alias (truncated)
Oper Status
Admin Status
Speed
Duplex
Type

show port counters

Use this command to display port counter statistics detailing traffic through the device and
through all MIB2 network devices.
Syntax
show port counters [port-string] [switch | mib2]
Parameters
port‐string
Alias Oper
(truncated) Status
-------------- -------
up
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
Alias configured for the port. For details on using the set port alias command, refer
to "set port alias" on page 4-9.
Operating status (up or down).
Whether the specified port is enabled (up) or disabled (down). For details on using
the set port disable command to change the default port status of enabled, refer to
"set port disable" on page 4-7. For details on using the set port enable command to
re-enable ports, refer to
Operational speed in Mbps or Kbps of the specified port. For details on using the set
port speed command to change defaults, refer to
Duplex mode (half or full) of the specified port. For details on using the set port
duplex command to change defaults, refer to
Advertised Ability" on page 4-14.
Physical port and interface type.
(Optional) Displays counter statistics for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 4‐1.
ge .3.14:
Admin Speed
Status
------- --------
up N/A
CLI" on page 4-1.
"set port enable" on page 4-8.
"set port
"Setting Auto-Negotiation and
Enterasys G-Series CLI Reference 4-5
show port counters
Duplex Type
------- -------------
N/A BaseT RJ45
speed" on page 4-10.