Clear Mac Address; Show Mac Unreserved-Flood - Enterasys G3G170-24 Cli Reference Manual

port‐string
append | clear
Defaults
If no port‐string is defined, the command will apply to all ports.
Mode
Switch command, read‐write.
Example
This example configures multicast MAC address 01‐01‐22‐33‐44‐55 for VLAN 24.
G3(su)->set mac multicast 01-01-22-33-44-55 24

clear mac address

Use this command to remove a multicast MAC address.
Syntax
clear mac address mac-address [vlan-id]
Parameters
mac‐address
vlan‐id
Defaults
If no vlan‐id is specified, the multicast MAC address is cleared from all VLANs.
Mode
Switch command, read‐write.
Example
This example clears multicast MAC address 01‐01‐22‐33‐44‐55 from VLAN 24.
G3(su)->clear mac multicast 01-01-22-33-44-55 24

show mac unreserved-flood

Use this command to display the state of multicast flood protection.
Syntax
show mac unreserved-flood
Specifies the port or range of ports the multicast MAC address can be
learned on or flooded to.
Appends or clears the port or range of ports from the egress port list.
Specifies the multicast MAC address to be cleared. The MAC address
can be formatted as xx:xx:xx:xx:xx:xx or xx‐xx‐xx‐xx‐xx‐xx.
(Optional) Specifies the VLAN ID from which to clear the static
multicast MAC address.
clear mac address
Enterasys G-Series CLI Reference 11-23