Show Ip Pimsm Rp Output Detail - Enterasys G3G170-24 Cli Reference Manual

Parameters
group‐address
group‐mask
all
candidate
Defaults
None.
Mode
Any router mode.
Examples
This example shows how to display the RP set for a specific group address.
G3(su)->router> show ip pimsm rp 224.0.0.0 240.0.0.0
Group
Address Group Mask
--------- ----------
224.0.0.0 240.0.0.0
Table 16‐12 provides an explanation of the command output.
Table 16-12 show ip pimsm rp Output Details
Output Field
Group Address
Group Mask
Address
Hold Time
Expiry Time
Component
C-RP Priority
This example shows how to display the candidate RPs for each group address.
G3(su)->router> show ip pimsm rp candidate
CANDIDATE RP TABLE
Group Address
--------------- --------------- ---------------
224.0.0.0
The multicast group IP address.
The multicast group address subnet mask.
For all known group addresses.
Display PIM‐SM candidate‐RP table information.
RP SET TABLE
Address Hold Time
(hh:mm:ss)
----------- ---------- ----------- --------- -----------
192.168.30.2 00:02:15
What it displays
The address of the group for which the RP set is displayed.
The mask of the group address.
The IP address of the RP.
The hold time of the RP.
The minimum time remaining before the RP will be declared down.
A number which uniquely identifies the component. Each protocol instance
connected to a separate domain should have a different index value.
The candidate-RP priority of the RP.
Group Mask Address
240.0.0.0 192.168.30.2
Expiry Time Component C-RP Priority
(hh:mm:ss)
00:02:30 1
Enterasys G-Series CLI Reference 16-53
show ip pimsm rp
0