Clear Spantree Adminedge; Configuring Spanning Tree Loop Protect Parameters; Purpose - Enterasys G3G170-24 Cli Reference Manual

clear spantree adminedge

Defaults
None.
Mode
Switch command, read‐write.
Usage
The default behavior of the edge port administrative status begins with the value set to false
initially after the device is powered up. If a Spanning Tree BDPU is not received on the port within
a few seconds, the status setting changes to true.
Example
This example shows how to set
G3(su)->set spantree adminedge ge.1.11 true
clear spantree adminedge
Use this command to reset a Spanning Tree port to non‐edge status.
Syntax
clear spantree adminedge port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset
G3(su)->clear spantree adminedge ge.1.11

Configuring Spanning Tree Loop Protect Parameters

Purpose

To display and set Spanning Tree Loop Protect parameters, including the global parameters of
Loop Protect threshold, window, enabling traps, and disputed BPDU threshold, as well as per
port and port/SID parameters. See "Loop Protect" on page 6‐2 for more information about the
Loop Protect feature.
6-38 Spanning Tree Configuration
ge .1.11 as an edge port:
Specifies port(s) on which to reset edge port status. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 4‐1.
ge
.1.11 as a non‐edge port: