Show Nodealias Config; Set Nodealias; Show Nodealias Config Output Details - Enterasys G3G170-24 Cli Reference Manual

show nodealias config

show nodealias config
Use this command to display node alias configuration settings on one or more ports.
Syntax
show nodealias config [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, node alias configurations will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display node alias configuration settings for ports
G3(rw)->show nodealias config ge.2.1-9
Port Number
-----------
ge.2.1
ge.2.2
ge.2.3
ge.2.4
ge.2.5
ge.2.6
ge.2.7
ge.2.8
ge.2.9
Table 11‐7 provides an explanation of the command output.
Table 11-7 show nodealias config Output Details
Output Field
Port Number
Max Entries
Used Entries
Status

set nodealias

Use this command to enable or disable a node alias agent on one or more ports, or set the
maximum number of alias entries per port.
Syntax
set nodealias {enable | disable | maxentries maxentries} port-string
11-32 Logging and Network Management
(Optional) Displays node alias configuration settings for specific port(s).
Max Entries
-----------
16
47
47
47
47
47
47
47
4000
What It Displays...
Port designation.
Maximum number of alias entries configured for this port.
Number of alias entries (out of the maximum amount configured) already used by
this port.
Whether or not a node alias agent is enabled (default) or disabled on this port.
Used Entries
------------
0
0
2
0
0
2
0
0
1
ge .2.1 through 9:
Status
------
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable