Clear Port Lacp - Enterasys G3G170-24 Cli Reference Manual

disable
padminkey
padminkey
padminport
padminport
padminportpri
padminportpri
padminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync
| lacpcollect |
lacpdist | lacpdef |
lacpexpire
padminsysid
padminsysid
padminsyspri
padminsyspri
Defaults
At least one parameter must be entered per port‐string.
If enable or disable are not specified, port(s) will be enabled with the LACP parameters entered.
Mode
Switch command, read‐write.
Usage
LACP commands and parameters beginning with an "a" (such as aadminkey) set actor values.
Corresponding commands and parameters beginning with a "p" (such as padminkey) set
corresponding partner values. Actor refers to the local device participating in LACP negotiation,
while partner refers to its remote device partner at the other end of the negotiation. Actors and
partners maintain current status of the other via LACPDUs containing information about their
ports' LACP status and operational state.
Example
This example shows how to set the actor admin key to 3555 for port
G3(su)->set port lacp ge.3.16 aadminkey 3555

clear port lacp

Use this command to clear link aggregation settings for one or more ports.
Syntax
clear port lacp port port-string {[aadminkey] [aportpri] [asyspri] [aadminstate
{lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef
| lacpexpire | all}] [padminsyspri] [padminsysid] [padminkey] [padminportpri]
[padminport] [padminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]}
(Optional) Disables LACPDU processing on this port.
Sets a default value to use as the port's partner admin key. Only ports with
matching admin keys are allowed to aggregate. Valid values are 1 ‐ 65535.
Sets a default value to use as the port's partner admin value. Valid values
are 1 ‐ 65535.
Sets a default value to use as the port's partner port priority. Valid values
are 0 ‐ 65535, with lower values given higher priority.
Sets a port's partner LACP administrative state. See aadminstate for valid
options.
Sets a default value to use as the port's partner system ID. This is a MAC
address.
Sets a default value to use as the port's partner priority. Valid values are 0
‐ 65535, with lower values given higher priority.
clear port lacp
ge .3.16:
Enterasys G-Series CLI Reference 4-45